TOYOTA LAND CRUISER 80 Series FJ80, FZJ80, HDJ80 & HZJ80 Aug.91-98
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit
Product/Vehicle Details:
- If air assist airbags fitted prior, add weld in part OA6004
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
- Standard Height to raised up to 50mm, Compatible with standard Air Control kits, excl. Intelliride
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- If air assist airbags fitted prior, add weld in part OA6004
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
- Standard Height to raised up to 50mm, Compatible with standard Air Control kits, excl. Intelliride
Product/Vehicle Details:
- If air assist airbags fitted prior, add weld in part OA6004
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended, Metric Tubing Option
- Standard Height to raised up to 50mm, Not available above 50mm, Compatible with Intelliride control systems
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- If air assist airbags fitted prior, add weld in part OA6004
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended, Metric Tubing Option
- Standard Height to raised up to 50mm, Not available above 50mm, Compatible with Intelliride control systems
Product/Vehicle Details:
- Welding Required
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Fitment Position: Rear Axle
Fitment Time: 60 minutes
Availability: In Stock
- Welding Required
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Coil Replacement Kit, Requires front bump stops if not factory fitted
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Fitment Position: Front Axle
Fitment Time: 120 minutes
Availability: In Stock
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Coil Replacement Kit, Requires front bump stops if not factory fitted
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, 20-25mm raise for 01-91 on 80 Series
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, 20-25mm raise for 01-91 on 80 Series
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit, 20-25mm raise for 01-91 on 80 Series
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit, 20-25mm raise for 01-91 on 80 Series
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, Raised 50mm
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, Raised 50mm
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit, Raised 50mm
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit, Raised 50mm
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, Raised 75mm
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, Raised 75mm
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit, Raised 75mm
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit, Raised 75mm
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, Raised 100mm
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, Raised 100mm
Product/Vehicle Details:
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit, Raised 100mm
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling Required
- Based on stock rear heights of 555mm or 540mm, High Pressure Kit, Raised 100mm
Product/Vehicle Details:
- If air assist airbags fitted prior, add weld in part OA6004
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
- Standard Height to raised up to 50mm, Compatible with standard Air Control kits, excl. Intelliride
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- If air assist airbags fitted prior, add weld in part OA6004
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
- Standard Height to raised up to 50mm, Compatible with standard Air Control kits, excl. Intelliride
Product/Vehicle Details:
- If air assist airbags fitted prior, add weld in part OA6004
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended, Metric Tubing Option
- Standard Height to raised up to 50mm, Not available above 50mm, Compatible with Intelliride control systems
Fitment Position: Rear Axle
Fitment Time: 120 minutes
Availability: In Stock
- If air assist airbags fitted prior, add weld in part OA6004
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Easy Fit Kit
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended, Metric Tubing Option
- Standard Height to raised up to 50mm, Not available above 50mm, Compatible with Intelliride control systems
Product/Vehicle Details:
- Welding Required
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Fitment Position: Rear Axle
Fitment Time: 60 minutes
Availability: In Stock
- Welding Required
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended.
Product/Vehicle Details:
- Drilling & Cutting Required
- Raised 50mm
Fitment Position: Front Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling & Cutting Required
- Raised 50mm
Product/Vehicle Details:
- Drilling & Cutting Required
- High Pressure Kit, Raised 50mm
Fitment Position: Front Axle
Fitment Time: 120 minutes
Availability: In Stock
- Drilling & Cutting Required
- High Pressure Kit, Raised 50mm
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended. Requires extended front bump stops; space out factory fitted parts or fit long ones.
- Raised 50mm Coil Replacement Kit, Requires extended front bump stop (not in kit), Compatible with standard Air Control kits, excl. Intelliride
Fitment Position: Front Axle
Fitment Time: 120 minutes
Availability: In Stock
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended. Requires extended front bump stops; space out factory fitted parts or fit long ones.
- Raised 50mm Coil Replacement Kit, Requires extended front bump stop (not in kit), Compatible with standard Air Control kits, excl. Intelliride
Product/Vehicle Details:
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended. Requires extended front bump stops; space out factory fitted parts or fit long ones, Metric Tubing Option
- Raised 50mm Coil Replacement Kit, Requires extended front bump stop (not in kit), Compatible with Intelliride control systems
Fitment Position: Front Axle
Fitment Time: 120 minutes
Availability: Currently replenishing stock levels, "Request Quote" for availability.
Please note: The quickest way to enquire about ETA is to click "Request Quote" and fill out the Request a Quote form.
- Please check your relevant State & Federal regulations for vehicle approval requirements.
- Drilling Required
- Coil springs replaced with airbags to allow full height adjustment, on-board air controls recommended. Requires extended front bump stops; space out factory fitted parts or fit long ones, Metric Tubing Option
- Raised 50mm Coil Replacement Kit, Requires extended front bump stop (not in kit), Compatible with Intelliride control systems
No products found. Reset Filters